Scinomix SCI-PRINT VX2 Tube Labeler

Request a Quote

Fill in your details below to receive a quote on this item. Our team will be in touch as soon as possible.

Model No: 1044 Rev C

Serial No: 0225

Product ID: 12875

The Sci-Print VX2 is a vial labeling system, capable of printing and applying labels to vials ranging from 0.5 mL to 50 mL in size. The Sci-Print VX2 can be configured to sort racked tubes, receive bulk tubes, uncap/recap, fill and/or scan barcodes.


6 position workdeck (holds up to 600 tubes)• Handle multiple tube types with same system• Increases productivity & efficiency• Increases walk-away time• Eliminates human error• Reduces repetitive injuries• Consistency of label placement


System Requirements Windows 7/8/8.1/10 .NET 4.5.1 framework Network Requirements Requirements dependent on software version. May need RS232 or ethernet. Air Requirements 80-90 PSI @ 1 CFM. The air supply must be oil/contaminant free, with an inline regulator and air dryer. Main Power Requirements110-240 VAC 50/60 Hz 80W (Max) Transport and Storage Temperature-20 degrees C to +55 degrees C (20% to 80% non-condensing) Operating Environment (Indoor use only) Temperature: 10 degrees C to 40 degrees C Humidity: 20% to 80% non-condensing Altitude: Up to 2000M Main Supply: +/- 10% Rated Voltage Transient overvoltage: Installation Category (Overvoltage category) II Rated pollution: Pollution degree II Physical Dimensions Height: 33” (843mm) Width: 27” (670mm) Depth: 14” (355mm) Weight: 90lb. (41KG)Labeling Rate/Throughput 425 tubes per hour (throughput is impacted based on configuration). Tube Specifications Volume Range: 0.5 mL to 50 mL, Max Height: 120 mm, Max Diameter: 35 mm Rack Capacity 6 position work deck Certifications CE

Go back